PC
HARDWARE INTERVIEW QUESTIONS WITH ANSWERS.
1) What
is a computer?
Computer is a programmable
machine. It the integral part of everyday life.
2) What
are the different functions of a computer?
A computer does the following functions;
a) Accepting data
b) Processing Data
c) Storing Data
d) Displaying Data
3) Draw
the hierarchical classification of the computer.
4) How a
minicomputer different from a mainframe?
Minicomputer is a midsized multiprocessing and multi user computer. It
is also called mid-range server. But mainframes are huge computers, most
commonly occupying entire rooms or floor. It is highly costly.
5) What
is Super computer?
The
fastest type of computer.
Supercomputers are very expensive and are employed for specialized applications that require immense amounts of mathematical
calculations. For example, weather forecasting requires a supercomputer. Other
uses of supercomputers include animated graphics, fluid dynamic calculations, nuclear energy
research, and petroleum exploration.
6) Differentiate
Input and Output device.
Input devices are used for giving input to the computer. But output
devices are used to get the result back from the computer. The examples of
input devices are keyboard, mouse, scanner, digital camera atc...whereas output
devices include monitor, printer, projector etc....
7) What
is a storage device? What is the common classification?
Storage devices are used to store data in the computer. The different
types of storage devices are;
a) Magnetic Devices.
b) Optical Devices.
c) Solid-State Storage Devices.
8) What
do you mean by a processing device? What are the various types of processing
devices?
The main function of a computer is to process data. The various types of
processing device in a computer are;
a) Microprocessor
b) Chipset
c) BIOS
9) Differentiates
Serial and Parallel port.
Serial port and parallel port are used for
transferring data in/out of the computer. In serial port transmission only 1
bit is transmitted at a time. Most serial ports on personal computers conform
to the RS-232C or RS-422 standards. A parallel interface for connecting an
external device such as a printer. On PCs, the parallel port uses a 25-pin
connector (type DB-25) and is used to connect printers, computers and other
devices that need relatively high bandwidth. It uses parallel transmission of
data.
10) What
is an interface?
These are the communication channel that enables your computer to
exchange information with various devices.
11) What
is a microprocessor?
The most important electronic component on the computer. It is a
programmable logical device for processing data. In the world of personal computers, the
terms microprocessor and CPU are
used interchangeably.
12) What
are the factors affecting the speed of the microprocessor?
The following are the factors affecting the speed of the microprocessor.
a) Number of instructions build in the processor.
b) Bandwidth
c) Clock Speed
d) Number of transistors inside the processor
13) What
are the differences between Multitasking and Multiprocessing?
Multitasking- Enables the processor to do multiple
programs simultaneously by fast switching through the programs. Here doesn't
have the involvement of multiple processors.
Multiprocessing- Enables the processor to do multiple
programs simultaneously by the use of multiple processors.
14) What
the difference between FSB and BSB?
Front Side Bus. Another name for the system bus. The Front Side Bus connects
the CPU to main memory. A
microprocessor bus that connects the CPU to a
Level 2 cache is
called Back Side Bus. Typically, a backside bus runs at a faster clock speed than the Front Side Bus.
15) What
is packaging a microprocessor? What are the different packaging available?
Packaging is the process of connecting a microprocessor with a computers
motherboard. The types of microprocessor packaging are;
a) PGA
b) SPGA
c) SECC
d) LGA
16) What
is LGA ?
An LGA socket is the connection point for a central processing unit
(CPU) to fit into a motherboard. The LGA stands for Land Grid Array.
17) What
is CISC and RISC?
Reduced Instruction Set Computer (RISC) and Complex Instruction Set
Computer (CISC) are two philosophies by which computer chips are designed. RISC
became a popular technology buzzword in the 1990s, and many processors used in
the enterprise business segment were RISC-based.
18) What
is Intel Pentium?
The Intel Pentium is a series of microprocessors first developed by the
Intel Corporation. These types of processors have been found in many personal
computers since 1993.
19) Any difference between Pentium III and IV.
There have been a number of Pentium processor lines starting with the
base Pentium in 1993.The of the recent Pentium entries are Pentium III and
Pentium 4.
a) In a Pentium III processor, the bus speed
is generally 133 MHz (although there were a few with 100 MHz). The lowest bus
speed on a Pentium IV is 400 MHz, and there are versions with much higher
speeds (topping at 1066 MHz for the "extreme edition").
b) The Pentium 4s are smaller than the Pentium IIIs
c) Pentium III processors had (for the most part) about 512 KB of cache. Pentium 4 processors, on the other hand, start at 512 KB.
20) What
are the differences between Intel Celeron and Pentium family of Processors?
Celeron
- According
to Build Gaming Computers, Celeron processors are the low-end processor
intended for standard home computer use. SciNet reports the best Celeron
processor has an L2 Cache of 128kb, a clock speed limit of about 2.0 GHz
and runs at a core voltage of 1.75V. These are useful numbers for
comparison.
Pentium
- The
top Pentium processor is the Pentium 4 Prescott. CPU Scorecard reports it
has an L2 cache of 1MB (1024kb), a potential 3.0 GHz clock speed and runs
at about 1.4V. The lowest performing Pentium 4 processor, the Willamette,
has an L2 cache of 256kb, a potential 2.0 GHz clock speed and runs at
about 1.7V.
21) What
is Hyper Threading? What is the use of it?
A thread of
execution, or simply a "thread," is one series of instructions sent
to the CPU. Hyper-threading is a technology developed to help make better use
of spare processing cycles. Hyper-threaded processors have a duplicate set of
registers, small spaces of high-speed memory storage used to hold the data that
is currently needed to execute a thread. When a CPU core is delayed, waiting
for data to be retrieved from another place in memory, it can use these
duplicate registers to spend the spare computation cycles executing a different
thread. The second set of registers will be pre-loaded with the data needed to
execute the second thread, so the CPU core can begin work immediately
22) What
is Intel Atom processor?
The Intel Atom
family of processors are extremely small central processing units (CPU) found
mostly in ultraportable devices, such as netbooks, cell phones and tablet PCs,
according to Intel. While small and light on energy use, Atom processors can
handle the most common tasks, such as email and instant messaging.
23) What
is Nehalem Architecture?
Nehalem is
Intel's new microprocessor architecture The Core i7 chips were the first
processors ever produced using an architecture called Nehalem.
24) Which
is a heavy-duty Microprocessor of Intel?
Intel Xeon.
25) Which
is the processor suitable from Intel family of processors for Server and Workstation?
Intel Xeon.
26) What
is full name of AMD?
Advanced Micro Devices.
27) What
are the latest Processor of Intel and AMD?
For intel it is Intel Core i7 and AMD Opteron 6200 Series processor.
28) Write
socket LGA 775 is apt for which type of Intel Processors?
The top of the
line for the LGA775 series CPU socket was the Core 2 processor series, with the
Core 2 Duo E8600, Core 2 Extreme QX9770 and Core 2 Quad Q9650 being the three
top performers
29) Socket
939 is developed by AMD. It supports a maximum of how many bits of computing?
What are the the different processors of AMD is suitable for this socket?
AMD Athlon 64, AMD Athlon 64FX and AMD Athlon 64 X2.
30) Which
type of socket is needed to connect a dual core processor of Intel?
Socket LGA 775.
31) What
is Heat Sink? What is its use? If it is not in the system what will happen?
A heat sink is a component used to lower the temperature of a device.It
is most commonly there on the microprocessor. If it is not properly fixed the
system, the system will shutdown automatically to prevent further damage to the
processor.
32) A CPU fan should be placed in system. Why?
To make the system cool and more functioning.
33) What
is Upgrading a microprocessor? Why we have to do it?
34) Upgrading
a microprocessor is just physically replacing a processor with a new one. Before
doing so we have to make sure that the processor we want to use for your
upgrade is physically compatible with the socket on your computer's
motherboard. We also have to make sure that the motherboard has the internal
logic to support the processor.
35) What
are the causes of overheating of microprocessor?
a) Processor
fan may not be properly connected.
b) Heat
sink may be not contacted with the processor.
c) Jumpers
may be configured to over clock the CPU.
d) Voltage
supply incompatible
36) No
Display. What is the problem?
a) CPU
fan problem
b) Heat
sink related issue
c) Power
related issues
d) Improper
Jumper settings
37) What
is the use of Conventional memory in the system?
The size of conventional memory is 640KB. It is also called DOS memory
or Base memory. This memory is used by some small programs like Word star,
Lotus etc…DOS cannot use more than 640KB.
38) What
is main memory in a computer?
The main memory in a computer is called Random Access Memory. It is also
known as RAM. This is the part of the computer that stores operating system
software, software applications and other information for the central
processing unit (CPU) to have fast and direct access when needed to perform tasks.
39) What
is Cache memory? What is the advantage if a processor with more cache memory
you are using?
Cache memory is the memory area between RAM and Processor. If cache
memory increases the speed of the system will also improved.
40) What
are the different types of RAM?
SRAM, DRAM, VRAM, SGRAM, DDR-SDRAM etc….
41) Differentiate
SRAM and DRAM.
SRAM
Static RAM stores each bit of data on six metal oxide semiconductor
field effect transistors, or MOSFETs. SRAM is used in devices that require the
fastest possible data access without requiring a high capacity. Some examples
are CPU caches and buses, hard drive and router buffers and printers.
DRAM
Dynamic RAM stores data using a paired transistor and capacitor for each
bit of data. Capacitors constantly leak electricity, which requires the memory
controller to refresh the DRAM several times a second to maintain the data.
42) What
are the different DRAM types?
FPMDRAM, EDO DRAM, SDRAM, RDRAM, DDR-SDRAM
43) What
is the difference between DDR-I and DDR-II?
DDR2
is the successor to DDR RAM. DDR 2 incorporates several technological upgrades
to computer system memory, as well as an enhanced data rate.DDR 2 is capable of
achieving twice the data transfer rate of DDR-I memory because of its higher
clock speed. It operates at a lower voltage than DDR-I as well: 1.8 volts
instead of 2.5.
44) Which
is the latest DDR version? Which processor of Intel will support it?
The latest DDR version is DDR-III. Intel’s all latest processors such as
Core i3,i5 and i7 will support it.
45) What are
VRAM and SGRAM?
VRAM is Video Random Access Memory. Video adapter or video system uses
VRAM. VRAM is dual ported. It is costly. But SGRAM is not dual ported and not
costly. It is a less expensive approach to graphics functions. Most commonly
all low cost graphics cards are using it.
46) What
is SODIMM memory module?
Small outline dual in-line memory module (SODIMM or SO-DIMM) is a type
of random access memory (RAM). It is a smaller version of a dual in-line memory
module (DIMM).It is the type of the memory module can be used in laptop.
47) Which
is the memory packaging suitable for a sub-note book system?
Micro DIMM
48) What
is ECC/EPP?
EPP/ECP (Enhanced Parallel Port/Enhanced
Capability Port) is a standard signaling method for bi-directional parallel communication
between a computer and peripheral devices
that offers the potential for much higher rates of data transfer than the
original parallel signaling methods. EPP is for non-printer peripherals. ECP is
for printers and scanners. EPP/ECP is part of IEEE Standard 1284.
49) What
is over clocking?
Over clocking is the process of forcing a
computer component to run at a higher clock rate.
50) What
is memory bank?
Sets of physical memory modules is referred to as memory banks. A memory
bank serves as a repository for data, allowing data to be easily entered and
retrieved.
51) What
we need to consider before connecting a memory to the system?
a) Capacity
of the RAM required
b) Check
if installed memory is supported by motherboard and processor
c) Form
factor of the RAM
d) Type
of RAM needed
e) Warranty
of the RAM
52) What
is Upgrading the memory?
Adding a memory module to the existing bank on the available slot or
replacing the previous one with the increased memory size is also called
upgrading memory. This will surely increase the performance of the computer.
53) What
is BIOS beep code? What it does mean?
BIOS beep codes are the signs of different issues of the computer. The
beep code may vary depends on the manufacture of BIOS. For example in case of
Award BIOS the beep code will be,
1 long beep-
shows memory problem
1 long beep and 2 short beeps-
failure of DRAM parity
1 log beep and 3 short beeps- signifies
Video error
Continuous beep-
signifies failure in memory or Video memory.
54) Write
any 5 BIOS codes and their indications?
AMERICAN MEGATRENDS (AMI) BEEP CHART
BEEPS
|
ERROR
DESCRIPTION
|
1 Beep
|
Memory
timing error
|
2 Beeps
|
Mismatched
memory parity
|
3 Beeps
|
Memory
malfunction
|
4 Beeps
|
Motherboard
malfunction
|
5 Beeps
|
Bad CPU
|
6 Beeps
|
Keyboard controller
error
|
7 Beeps
|
General
exception error
|
8 Beeps
|
Video
memory error
|
9 Beeps
|
Bad ROM
checksum
|
10 Beeps
|
CMOS error
|
11 Beeps
|
Bad cache
RAM
|
55) What
is RDRAM?
56) What
is SIMM? Is it is using now?
Acronym for Single In line Memory Module, a
small circuit board that can hold a group of memory chips.
Typically, SIMMs hold up to eight (on Macintoshes) or nine (on PCs) RAM
chips. On PCs, the ninth chip is often used for parity error checking. Unlike
memory chips, SIMMs are measured in bytes
rather than bits.
Now a days this memory module is not used.
57) Why
do we call motherboard a motherboard?
Motherboard is the basic integrated board of the computer on which all
other components are connected. So that usually we call motherboard a "motherboard".
58) What
is motherboard? What are the different types of it?
Motherboard is the basic integrated board of the computer on which all
other components are connected. This is classified mainly into three Desktop,
Laptop and Server motherboard.
59) What
is the difference between integrated and non-integrated motherboard?
In integrated motherboard all of the external ports will be present. But
in case of non-integrated motherboard
only some important ports will be available instead of all. The non-integrated
motherboard is an old type of motherboard which now a day's not commonly
available.
60) How a
server motherboard different from a desktop?
A server motherboard is different from a desktop in features and
performance. The number of processor support, RAM slots ,Expansion card slots
etc...are more. For example the Intel® Server Board S5000PSL has the performance and features for growing businesses
demand. It provides excellent data protection, and advanced data management. It
support 64-bit Multi-Core Intel® Xeon® processor. Eight fully buffered
533/667 MHz DIMMs. Up to six SATA 3Gb/s ports.
61) What
is form factor of motherboard?
The form
factor of a motherboard determines the specifications for its
general shape and size. It also specifies what type of case and power supply will be supported, the placement of mounting
holes, and the physical layout and organization of the board. Form factor
is especially important if you build your own computer systems and need to
ensure that you purchase the correct case and components.
62) What is ATX? How it is different from AT?
Which is using now?
AT is a short for advanced technology, the AT
is an IBM PC
model introduced in 1984. It includes an Intel 80286 microprocessor, a
1.2MB floppy drive, and
an 84-key AT keyboard. The ATX form factor specified changes to
the motherboard, along with the case and power supply. Some of the design
specification improvements of the ATX form factor included a single 20-pin
connector for the power supply, a power supply to blow air into the case
instead of out for better air flow, less overlap between the motherboard and
drive bays, and integrated I/O Port connectors soldered directly onto the
motherboard. The ATX form factor was an overall better design for upgrading.
63) What
is the need of expansion slot in motherboard?
Alternatively referred to as an expansion port, an expansion slot is a
slot located inside a computer on
the motherboard or riser board that
allows additional boards to be connected to it.
64) What
is PCI slot? How is different from PCI Express (PCI-E)?
Short for Peripheral Component Interconnect, a local bus
standard developed by Intel
Corporation. PCI Express (Peripheral Component Interconnect
Express), officially abbreviated as PCIe, is a computer expansion card
standard designed to replace the older PCI, PCI-X, and AGP bus
standards.
65) What
is AGP slot? What is its use?
The Accelerated Graphics Port (often shortened to AGP) is a high-speed
point-to-point channel for attaching a video card to a
computer's motherboard,
primarily to assist in the acceleration of 3D
computer graphics. Since 2004 AGP has been progressively
phased out in favor of PCI Express
(PCIe).
66) What
is jumper? What is the need?
A metal bridge that closes an electrical circuit. Typically, a jumper
consists of a plastic plug that fits over a pair of protruding pins.
Jumpers are sometimes used to configure expansion boards. By placing a jumper plug over a different
set of pins, you can change a board's parameters.
67) What
CMOS and CMOS battery?
Short for complementary metal oxide semiconductor. Pronounced see-moss. The
CMOS chip holds the date, time, and system setup parameters.
This chip is powered by a 3Volt CMOS
battery.
68) What
is chipset?
A number of integrated circuits designed to perform one or more related
functions. This is one of the processing device in a computer.
69) Explain
any three Intel chipset?
a) Intel
P55 Express Chipset.-Desktop PC platforms based on the Intel® P55
Express Chipset combined with the Intel® Core™ i7-800 series processors and
Intel® Core™ i5-700 series processors create intelligent performance for faster
multi-tasking, digital media creation and gaming.
b) Intel
HD55 Express Chipset- a new architecture designed to deliver quality,
performance, and industry-leading I/O technologies on platforms powered by the
Intel® Core™ i7-800, Intel® Core™ i5, and Intel® Core™ i3 processors.
c) Intel
E7500 Chipset- a volume chipset supports dual-processor (DP) server systems
optimized for the Intel® Xeon® processor.
70) Which
is the chipset needed for Intel Core i7 and Core i5 processors?
Intel Core i7 900-series uses x58 chip set and Core i7 800-series and
Core i5 processors runs on P55 chipset.
71) Which
is the socket used by Intel Core i7 and i5 processors?
Intel Core i7 900-series uses LGA1366
socket and Core i5 CPUs--all three run on Intel's latest P55 chipset and
LGA1156 socket.
72) What
are the motherboard manufacturing companies?
Intel, Gigabyte, ASUS, Mercury, HP, Acer, Biostar, Compaq, Digital, IBM,
AMI.
73) Before
upgrading/replacing a motherboard what you need to consider?
a) Power
Connectors
b) Memory
Support
c) Hard
Disk Support
d) System
Case
74) Can
you upgrade motherboard?
Yes
75) One
system is not starting, but the fan is working. What is the problem?
76) What
is Intel LGA 1155 Socket?
LGA 1155, also called Socket H2, is an Intel microprocessor
compatible socket
which supports Intel Sandy
Bridge and the up-coming Ivy
Bridge microprocessors.LGA 1155 is designed as a replacement
for the LGA 1156
(known as Socket H).
77) What
is power supply unit?
A power supply unit (PSU) supplies direct current (DC)
power to the other components in a computer. It converts general-purpose alternating current
(AC) electric power from the mains to
low-voltage (for a desktop computer: 12 V, 5 V, 5VSB, 3V3, −5 V,
and −12 V) DC power for the internal components of the computer.
78) What
are the different types of Form Factors of Power Supply?
AT , ATX, Flex ATX, Micro ATX etc…
79) What
is NLX?
NLX (New Low Profile Extended) was a form factor proposed by Intel and developed jointly with IBM, DEC.
80) What
is Switching Mode Power Supply?
A switched-mode power supply (switching-mode power supply, SMPS, or
simply switcher) is an electronic power supply that
incorporates a switching regulator in order to be highly efficient in the
conversion of electrical power. Like other types of power supplies, an SMPS
transfer power from a source like the electrical power grid to a
load (e.g., a personal computer) while converting voltage and current
characteristics. An SMPS is usually employed to efficiently provide a regulated
output voltage, typically at a level different from the input voltage.
81) What
is the use of Molex Power connector?
Molex is a four pin power connector found in SMPS. It is used to supply
power to HDD, CD Drive, DVD Drive etc…
82) What
is Berg (mini Molex) connector is used to….
To provide power to Floppy Disk Drive.
83) What
are the different color cables found in Molex connector? What is the Power of
it.
-12V –Blue, -5V –White, 0V –Black, +3.3V –Orange, +5V –Red, +12V –Yellow.
84) What
are the methods used in a system for cooling?
a) Large
System Case
b) Arrangement
of Internal Components
c) Keeping
the System Clean.
d) Proper
Working of the System Case Fan.
85) Power
supply fan is not working and it emits a lot of sound. What will the probable
cause?
Most of the time this issue arises due to lots of dust is accumulated on
the fan motor.
86) What
is the capacity of a Floppy Disk?
1.44MB
87) Which
is the medium used in a floppy for storing data?
Magnetic Media.
88) What
is write protected notch in a
floppy? What is its use?
This is a switch used to eliminate the accidental deletion of data from
the floppy.
89) How
many tracts and sectors found in a normal floppy dick?
80 tracks and 18 sectors.
90) Which
is the file system of a floppy disk?
FAT
91) How
can you format a floppy? What is happening if you do so?
Insert the floppy to the system and open my computer. There we can find
the icon. Just right click and select format option. Otherwise we can use
format command . Formatting a floppy will creates sectors and tracks on the
floppy.
92) System
is not showing floppy disk drive icon in Mycomputer.What
will the probable cause?
The device is not detected or disabled.
93) I
have inserted a new floppy disk into my drive. The data can be read. But not
able to make modifications. Why?
The disk may be in write protected mode.
94) What
is HDD? What are the different types available in the market now?
A hard disk drive (HDD; also hard
drive or hard disk) is a non-volatile, random access
digital magnetic data
storage device. It is the secondary storage media. There
are different types of hard disk, based on the the intefaces they used we can
classify them as IDE, SATA, SCSI etc...
95) What
is SATA?
Serial ATA (SATA or Serial Advanced Technology Attachment) is a computer bus
interface for connecting host bus adapters to mass
storage devices such as hard disk drives and optical drives.
Serial ATA was designed to replace the older parallel ATA (PATA) standard (often called by the old name IDE), offering several advantages over the older
interface: reduced cable size and cost
(7 conductors instead of 40), native hot swapping,
faster data transfer
through higher signalling rates, and more efficient transfer through an (optional) I/O queuing protocol.
96) In
Speed how SATA is different from IDE?
SATA- Serial Advanced Technology Attachment
(SATA) is high speed serial interface designed to replace IDE and EIDE drive
standard SATA has a seven pin connector. SATA transfer speed of data up to 600
MB per second. Now a day use SATA.
IDE- Integrated Drive Electronics (IDE) it has a 40/80 pins connector. IDE transfer speed of data up to 100/133 MB per second few time ago mostly use IDE.
IDE- Integrated Drive Electronics (IDE) it has a 40/80 pins connector. IDE transfer speed of data up to 100/133 MB per second few time ago mostly use IDE.
97) What
is eSATA?
External Serial Advanced Technology Attachment or eSATA is an external
interface for SATA technologies. eSATA
cables are narrow and can be up to 6.56 feet (2 meters) in length. eSATA requires its own power connector. It
is still an excellent choice for external disk storage.
98) What
is SCSI? Is the SCSI Hard Disk is needed for a home purpose?
SCSI is Small Computer System Interface ,
is a type of interface used for computer components such as hard drives, optical
drives, scanners and tape drives. SCSI is a faster, more robust technology than IDE
amd SATA, and has traditionally been utilized in servers. Aside from speed,
another great advantage over IDE and SATA
is that the SCSI card can connect 15 or
more devices in a daisy chain. The controller assigns each device its own SCSI ID, allowing for great flexibility towards
expanding any system. It is more costly. It is not needed for a home purpose.
99) Is
there is USB HDD? If yes what is the speed?
Yes. If your HDD is based on USB 3.0 it can offer a maximum transmission
speed of up to 5 Gbit/s (640 MB/s), which is over 10 times faster than USB
2.0 (480 Mbit/s, or 60 MB/s).
100) What
is IEEE 1394 Interface?
The IEEE 1394 interface is a serial
bus interface
standard for high-speed communications. The interface is also
known by the brand names of FireWire (Apple),
i.LINK (Sony),
and Lynx (Texas
Instruments). IEEE 1394
replaced parallel SCSI in
many applications, because of lower implementation
costs and a simplified, more adaptable cabling
system. The original release of IEEE 1394-1995 specified what is now known as
FireWire 400. It can transfer data between devices at 100, 200, or 400 Mbit/s. EEE
1394c-2006 was published on June 8, 2007 that provides 800 Mbit/s.
101) What
are Solid State Drive means?
A
solid-state drive (SSD), sometimes called a solid-state disk or electronic
disk, is a data
storage device that uses solid-state memory to
store data. SSDs use microchips
which retain data in non-volatile memory chips and contain no moving parts.
Compared to electromechanical HDDs, SSDs are typically less susceptible to
physical shock, are silent, have lower access time and latency, but
are more expensive per gigabyte (GB).